Specifications

01

I&T FOIL SPECIFICATIONS

HOT STAMPING FOIL SPECIFICATIONS

Hot Stamping Foil is the basic element of the hot stamping.
The foil is a thin film coated with the layer of color that transferred onto your product using the hot stamping equipment.
The basic make up of hot stamping foil layers are Release Coat Layer, Ink Layers, and Adhesive Layer.
A clear carrier film upon which the ink is printed, the ink is transferred to the product using heat and pressure.

LAMINATION FOIL SPECIFICATIONS

Advantage of laminating foil increases the strength and stability of your material surface.
And also gives metallic final look that differentiated from existing laminated paper.
02

Product Specifications

Hot Stamping Foil Specifications

① Transparent Film (Carrier Film)
② Release Primer
③ Design
④ Adhesive

Hot Stamping Foil Specifications

① UV Coating
② Transparent Film
③ Primer
④ Design
⑤ Adhesive
  • Transparent Film - 19mic ~ 36mic ( Gloss, Matte, C-Matte )
  • Release Layer - Primer layer between transparent film and design
  • Design Layer - Combination of various designs such as woodgrain, metalic, and brushed line
  • Adhesive - Adhesive coating that fits various materials.
  • Dimensions : 640mm, 720mm, 1300mm
  • Film Thickness : 19mic ~ 36mic
  • Light Fastness : 300~1,500Hrs
  • Anti-scratching : 8 to 30 times (MEK rubbing test with back and forth)
  • UV Anti-scratching : 150 to 400 times (Taber abrasion test)
03

Applying and Working conditions

  • APPLICATION TO : Can be applied to most areas of everyday life, including building materials and household goods
    ex)Picture Frames, Interior Mouldings, Art Wall, Indoor Wall Panels, Window Frame, Doors, Furniture, Edging area of upholsteries
  • HEATING & PRESS : Hot stamping roller temperature 180 C and 210 C degrees. Our hot stamping foil can use Roll-On or Vertical Up-Down equipment.
  • STAMPING PRESSURE : Various
  • STAMPING MATERIAL : Substrate material should be suitable for our hot stamping foil.
  • Customer is to supply us the substrate material for foil development.
  • CARRIER FILM When using our hot-stamping film, the machine must be equipped to release the film.
  • SUBSTRATE : PS, PVC, PP, PE, PET, PET-G, ABS, MDF, ACRYLIC, ALUMINUM, PAPER, MDF and etc.
  • Application of suitable adhesive to customer's request for injection test by applying suitable adhesive to customer requirements.